EasyManua.ls Logo

Hotronic Micro Dry - Operating Instructions and Tips

Default Icon
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MICRO DRY
14
Not for use in gloves, socks, or garments other than shoes and boots.
4.1 Helpful tips
Make sure not to pinch or otherwise suffocate air circulation when plac-
ing unit into footwear. Open lacing and closure system and pull the
tongue forward to open footwear as much as possible.
Footwear should be dried after every use to help prevent bacteria and
fungus growth the primary cause of footwear odor.
Smaller footwear will dry quicker than larger items.
Your energy efficient Micro Dry heats to a gentle temperature and qui-
etly and quickly dries wet shoes and boots, but it does not generate a
forceful air stream that might possibly damage.
4.2 Operation time
Drying time varies depending upon extent of moisture as well as tem-
perature and humidity.
Please note that the device will not stop drying automatically. Please
disconnect the device from power supply to stop it.
Check function of Micro Dry and humidity of shoes during use.
5. Maintenance
5.1 Cleaning
Make sure that you unplug the device before cleaning!
The outside of the device can easily be cleaned with a clean cloth or
soft brush. If you use mild soap make sure to avoid humidity getting
inside the Micro Dry.
Never empty or spray cleaning agents into the device.
Cleaning of the Technical components, if this is really required, must
be performed by qualified personnel.

Table of Contents