EasyManua.ls Logo

HotSpring Pulse User Manual

HotSpring Pulse
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Hot Spring Spa Pre-Delivery Instructions
Pre-Delivery Instructions
Please take the time to read this booklet carefully, as it will provide you with the information you will need to ensure
the safe, secure, and timely installation of your new spa. The following sections are guidelines on how to prepare for
delivery and set-up of your new spa. Specifically covered are site selection, delivery access, ground preparation, and
electrical requirements.
Remember to carefully read the Owners Manual that accompanies your spa, and to complete the Warranty Card
within 10 days of delivery. These items, along with other valuable information, will be found in the Owner’s Package
which has been placed in the equipment compartment of your spa, where you will also find its serial number.
Watkins Manufacturing Corporation reserves the right to change features, specifications and design without
notification and without incurring any obligation.
DATE PURCHASED: _________________________________________________________________
DATE INSTALLED: ___________________________________________________________________
DEALER: ___________________________________________________________________________
ADDRESS: __________________________________________________________________________
TELEPHONE: _______________________________________________________________________
In most cities and counties, permits will be required for the installation of electrical circuits or the construction of
exterior surfaces (decks and gazebos). In addition, some communities have adopted residential barrier codes which
may require fencing and/or self-closing gates on the property to prevent unsupervised access to a pool (or spa) by
children under 5 years of age. Your Hot Spring spa is equipped with a locking cover that meets the ASTM F1346-91
Standard for Safety Covers and as a result, is usually exempt from most barrier requirements. As a general practice,
your local Building Department will inform you of any applicable barrier requirements at the time a permit is obtained
for the installation of an electrical circuit. Your Hot Spring dealer can provide information on which permits may be
required.
Congratulations on your decision to
enjoy the finest spa available...
Welcome to the growing family of
Hot Spring spa owners.
Limelight
®
Collection
Register your warranty
using the QR code below:
Question and Answer IconNeed help?

Do you have a question about the HotSpring Pulse and is the answer not in the manual?

HotSpring Pulse Specifications

General IconGeneral
BrandHotSpring
ModelPulse
CategoryHot Tub
LanguageEnglish

Summary

Site Selection and Preparation

Installation Locations

Covers outdoor, patio, deck, and indoor installation considerations.

Delivery Access

How to determine the necessary clearance for spa delivery based on dimensions.

Ground Preparation

Foundation Types

Recommended foundation types: concrete pads, brick surfaces, wood decking.

Installation Notes

Notes on foundation types like stepping stones and their potential issues.

Electrical Requirements

230 Volt Operation Requirements

Details on the electrical service, circuit breakers, and subpanel needed for 230V operation.

Gleam (Converted-Optional) Electrical

Cautions

Important warnings regarding wiring, conductors, and GFCI protection.

Bolt™ (Model BLT) 230 Volt Converted Model Electrical

115 Volt GFCI and Operation

GFCI safety, testing, and 115V circuit requirements for the Bolt model.

Contractor Suggestions

Contractor Contact Information

Space to record contact information for electricians, masons, and general contractors.

Services Available from Your Hot Spring® Dealer

Dealer Service Offerings

Lists dealer services like site inspection, setup, operation explanation, and maintenance.

Related product manuals