HotSpring Pulse - Page 6

x Page 6 x Page 6 Pre-Delivery Instructions
PULSE
®
(Model PLS)
Dimensions
NOTE: All dimensions are approximate; measure your spa
before making critical design or pathway decisions.
NOTE: Watkins Manufacturing Corporation recommends that the Pulse be installed on a minimum 4” (10 cm) thick
reinforced concrete pad or structurally sound deck able to support the “dead weight” found in the spa specification
chart.
WARNING: The Pulse must not be shimmed in any manner.
PULSE
89" (226cm)
89"
(226cm)
3.5" (8.9 cm)
34.5" 87.6 cm)
38" (96.5 cm)
65 1/2" (166.4 cm)
18.5” (47cm)
74.5” (189.2 cm)
40.5” (102.9cm)
(Bottom view)
(Front view)
Upside Down View
of Spa
Drain
Electrical Cutout 1.5" (4.4 cm)
Door DoorDoor