Need help?Do you have a question about the Hougen HMD130 and is the answer not in the manual?
Welcomes the user and provides an introduction to the Hougen brand.
Details cutter capacity, depth, motor, weight, and duty cycle.
Lists weighted sound pressure and power uncertainty values.
Guides on unpacking, checking contents, and initial assembly.
Notes the drill's compatibility with RotaLoc Plus cutters.
Advises on keeping the work area clean, lit, and free from hazards.
Covers plug matching, grounding, and avoiding wet conditions.
Emphasizes alertness, PPE, proper clothing, and avoiding unexpected starts.
Instructions on tool usage, avoiding force, and proper care.
Covers electrical connections, extension cords, outdoor use, and welding.
Steps for positioning the drill and activating the magnet.
Guidance on lubricating the cutter and starting the motor.
Advice on feed pressure and drilling through multiple material layers.
Procedures for finishing cuts, retracting the cutter, and ejecting slugs.
Explains the safety switch function and maintenance checks.
Step-by-step guide for installing RotaLoc Plus cutters into the spindle.
Visual layout of the control panel and its wiring.
Identifies specific parts of the control panel assembly.
Visual breakdown of major drill components with part numbers.
Comprehensive list of all parts with item numbers, part numbers, descriptions, and quantities.
Lists individual RotaLoc Plus cutters by diameter and part number.
Describes available kits that include multiple cutters and pilots.
Details the warranty period, coverage, and exclusions for the product.
Instructions on how to find certified repair facilities.
General| Model | HMD130 |
|---|---|
| Frequency | 50/60 Hz |
| Drill Capacity | 1/2" (13 mm) |
| Type | Magnetic Drill |
| Voltage | 230 V |
| Max Drilling Capacity in Steel | 32 mm |
| Max Cutting Depth | 50 mm |
| Coolant System | Integrated |
To Next Page
