Why is my Houghton Air Conditioner cooling capacity poor?
If your Houghton Air Conditioner isn't cooling well, make sure the filter is clean. Set the fan to high for maximum cooling. Also, ensure all doors, windows, and the sunroof are closed. Using curtains or awnings can also help reduce the heat load.
What to do if my Houghton Air Conditioner is not cooling?
If your Houghton Air Conditioner isn't cooling, ensure that it is set to cooling mode and the cooling mode light is on. The temperature setting on the remote should be lower than the room temperature. Note that the compressor may have a three-minute delay before starting.
General| Power Supply | 220-240V, 50Hz |
|---|---|
| Refrigerant | R410A |
| Cooling Capacity | 13500 BTU |
| Power Consumption (Cooling) | 1.25 kW |
| Operating Temperature (Cooling) | 18°C to 43°C |
| Noise Level (Indoor/Outdoor) | 52 dB |
Ensures safe operation by providing warnings on grounding, leakage detection, maintenance, and installation.
Lists actions to avoid, preventing machine damage or personal injury.
Describes the intended use of the HOUGHTON BELAIRE air-conditioner in recreational vehicles.
Provides measures to reduce heat load and improve air-conditioner efficiency.
Explains condensation causes and measures to reduce it, noting warranty exclusions.
Outlines generator requirements for the air-conditioner and notes warranty exclusions.
Covers general instructions, national rules, qualifications, and roof suitability for installation.
Details roof requirements for weight support and proper leveling, advising caravan manufacturer consultation.
Advises on optimal placement, clearance, orientation, and avoiding airflow obstructions for the rooftop unit.
Steps for installing the outlet gasket, ensuring a dry surface, and placing the outdoor unit.
Attaching the outlet air duct and connecting the power supply to the 3-pole terminal block.
Installing the plenum mounting bracket and connecting the outlet air duct and plenum assembly.
Switching on, selecting FAN mode, COOL mode, and HEAT mode for basic operation.
Identifies and explains the functions of various buttons and displays on the remote controller.
Details the mode display, temperature display, and touch screen functionality of the unit's plenum.
Guides on powering on the unit and selecting fan speeds (Low, Medium, High).
Instructions for setting the temperature and fan speed in COOL mode.
Explains how to operate the unit in DRY, HEAT, and AUTO modes with temperature and fan settings.
Instructions on switching between Celsius and Fahrenheit temperature displays.
Procedure for powering down the air-conditioner using the on/off key.
Details how to cycle through modes (OFF, COOL, FAN, HEAT) using the plenum touch screen.
Provides advice on automatic mode indicators, remote operation, display control, and frost/low temperature handling.
Guidance on cleaning and washing return air filters for optimal performance.
Recommends checking bolt tightness and regular operation for unit longevity and protection.
Addresses problems like no display, cooling/heating failure, and poor cooling capacity.
Lists error codes and provides questions for effective fault diagnosis.
To Next Page
