PREPARING YOUR SCOOTER
PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY
ATTACHING THE HANDLEBARS AND BRAKE
1. Attach the right handlebar by placing it into appropriate socket
and twisting it clockwise in the correct direction.
2. Attach the brake into left handlebar.
3. Attach the left handlebar by placing it into appropriate socket and
twisting it counter-clockwise in the correct direction.
4. Tighten the screw in the brake with the included wrench.
CLOCKWISE
COUNTER-CLOCKWISE
ATTACH BRAKE
TIGHTEN SCREW
18
To Next Page
Loading...
