Hover-1 EAGLE 3.0 - Warranty Information and Troubleshooting; Common Error Codes

WARRANTY
For warranty information, please visit us at www.hover-1.com
Aix Serial Number Label Here:
Manufacturer: DGL Group, Ltd.
2045 Lincoln Highway, Edison, NJ 08817
Error codes
Error E1- motor hall failure, the motor needs to be
replaced
Error E2 - accelerator failure, the accelerator needs to
be replaced
Error code E3 - motor blocking fault, release the
accelerator
Error E4/MOS - mainboard MOS tube failure, the
mainboard needs to be replaced
Error E6 - controller / instrument communication failure,
the controller needs to be replaced
Error E7 - battery over-voltage protection, the battery
needs to be replaced
Error E9 - brake failure, the brake needs to be replaced
Error E8 - controller error, the controller needs to be
replaced
25