Hozelock Pico Power 7920

Questions and Answers

K
kpatelAug 2, 2025
What to do if Hozelock Pico Power 7920 pump does not reach working pressure?
- W
  wjimenezAug 2, 2025
  If the Hozelock Pressure Washer pump isn't reaching working pressure, several issues could be the cause. The nozzle might be worn and needs replacement. The water filter could be blocked, requiring cleaning. Low water supply pressure could be the problem, so ensure the water supply tap is fully open. Air being sucked into the product can also cause this, so check the tightness of hose fittings. Another possibility is air in the pump; to resolve this, switch off the appliance, repeatedly depress and release the gun trigger until the water flows steadily, then switch the appliance back on. Finally, the adjustable nozzle might not be positioned correctly; try turning the adjustable nozzle (+).
G
garciakeithAug 12, 2025
Why Hozelock Pico Power 7920 pressure drops during use?
- K
  Karen ParrishAug 12, 2025
  If the pressure drops during the use of your Hozelock Pressure Washer, it could be due to several reasons. If you're using water intake from an external tank, try connecting the appliance to the mains water supply. Another cause might be that the intake water is too hot; in this case, reduce the water temperature. Also, the nozzle may be clogged, so try cleaning it.
L
Loretta LittleAug 22, 2025
How to troubleshoot Hozelock Pico Power 7920 Pressure Washer when motor sounds but fails to start?
- M
  Marc CantuAug 22, 2025
  If your Hozelock Pressure Washer motor sounds but fails to start, the issue might stem from an insufficient power supply. Check that the voltage of the mains power supply line matches what's indicated on the rating plate. Also, voltage loss due to the use of an extension cable could be the cause. Therefore, check the characteristics of the extension cable.