To Next Page
D
desireeconleyJul 31, 2025
How to fix Hozelock 130 Pressure Washer when pump does not reach working pressure?
- MMitchell CunninghamJul 31, 2025
If the pump of your Hozelock Pressure Washer isn't reaching working pressure, several factors could be at play. It might be due to a worn nozzle, which would require replacement. Alternatively, the water filter could be blocked, necessitating cleaning. Ensure the water supply tap is fully turned on to address low water supply pressure. Check the tightness of hose fittings to prevent air from being sucked into the product. If there is air in the pump, switch off the appliance, repeatedly depress and release the gun trigger until the water flows steadily, then switch the appliance back on. Lastly, make sure the adjustable nozzle is correctly positioned by turning it to the (+) position.
General
