HP 10512 Switch Chassis
JC748A
Note 4
If more than 1 Fabric Module is selected, they must be of the same Type.
Management Modules
System (standard 0 // maximum 2) User Selection (minimum 1 // maximum 2) per enclosure
HP 10500 Main Processing Unit
JC614A
See Configuration
Note:1
HP 10500 Type A MPU w/Comware v7 OS
JG496A
See Configuration
Note:1,2
HP 10500 Type A MPU w/Comware v7 OS
JG496A
See Configuration
Note:1,2,3
Configuration Rules:
Note 1
If 2 Management Module are selected, they must be the same Sku number.
Note 2
Note in Watson: This MPU supports CWv7 only and may not have some features from CWv5.
Note 3
The following Interface Modules are Not Supported with this Management
Module:
HP 7500 Advanced VPN Firewall Module
JD249A
HP 7500 Load Balancing Module
JD252A
HP 7500 SSL VPN Module w/500-user Lic
JD253A
HP 7500 NetStream Monitoring Module
JD254A
Remarks:
For Switch 10504, these modules can only be inserted into Slots 0 and 1. For Switches 10508 and 10508-
V, these modules can only be inserted into Slots 4 and 5. For Switch 10512, these modules can only be
inserted into Slots 6 and 7.
Transceivers
SFP Transceivers
HP X110 100M SFP LC LH40 Transceiver
JD090A
HP X110 100M SFP LC LH80 Transceiver
JD091A
HP X115 100M SFP LC FX Transceiver
JD102B
QuickSpecs
HP 10500 Switch Series
Configuration
DA - 14167 North America — Version 20 — December 9, 2013
Page 19
To Next Page
Loading...
