Need help?Do you have a question about the HP 1420 Series and is the answer not in the manual?
General| Type | Unmanaged |
|---|---|
| Form Factor | Rack-mountable or desktop |
| Power Supply | Internal |
| Layer | Layer 2 |
| Energy Efficient Ethernet | Yes |
| Management | Unmanaged |
| Power Consumption | Varies by model |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Uplink Ports | SFP (selected models) |
| Fanless | Yes (selected models) |
| Jumbo Frame Support | Yes |
| Ports | 8, 16, or 24 RJ-45 10/100/1000 ports or 24 RJ-45 10/100/1000 ports + 2 SFP ports |
Safety guidelines to prevent equipment damage or bodily injury during installation.
Step-by-step guide for securely mounting the HP 1420 switch in a 19-inch rack.
Instructions for horizontal surface and wall mounting, including specific requirements for each method.
Instructions for connecting network cables to the switch's Ethernet ports.
Detailed steps for installing SFP/SFP+ transceiver modules and connecting optical fibers.
Instructions for connecting AC power and verifying the switch installation is correct.
Provides common troubleshooting steps for issues like power LED or LAN interface LED being off.
To Next Page
