HP 1420-24G-2SFP User Manual

EL-MF877-00 Page 1
Template Revision B
Product End-of-Life Disassembly Instructions
Product Category: Calculators
Marketing Name / Model
[List multiple models if applicable.]
HP 1420-24G-2SFP Switch
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
3
Batteries
All types including standard alkaline and lithium coin
or button style batteries
0
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
0
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Includes background illuminated displays with gas
discharge lamps
0
Cathode Ray Tubes (CRT)
0
Capacitors / condensers (Containing PCB/PCT)
0
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
0
External electrical cables and cords
0
Gas Discharge Lamps
1
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
0
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
0
Components and waste containing asbestos
0
Components, parts and materials containing
refractory ceramic fibers
0

HP 1420-24G-2SFP Specifications

General

Model	HP 1420-24G-2SFP
Category	Switch
Power Supply	Internal
Mounting	Rack-mountable
Ports	24 x 10/100/1000 ports, 2 x SFP slots
MAC Address Table Size	8000 entries
Jumbo Frame Support	Yes
Operating Temperature	0 to 50 °C
Operating Humidity	10 to 90% (non-condensing)

Summary

Items Requiring Selective Treatment

Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA)

Items classified as requiring selective treatment, with a surface greater than 10 sq cm.

Batteries

All types including standard alkaline and lithium coin or button style batteries requiring selective treatment.

Mercury-Containing Components

Components containing mercury, like lamps, display backlights, scanner lamps, switches, or batteries.

Liquid Crystal Displays (LCD)

Displays with a surface greater than 100 sq cm, including background illuminated ones with gas discharge lamps.

Gas Discharge Lamps

Specific lamps that contain gas and require selective treatment.

Plastics with Brominated Flame Retardants

Plastics weighing over 25 grams containing brominated flame retardants, excluding PCBs.

Components with Toner and Ink

Items containing toner and ink, including cartridges, print heads, tubes, vent chambers, and service stations.

Components with Asbestos

Components and waste materials that contain asbestos.

Components with Refractory Ceramic Fibers

Components, parts, and materials containing refractory ceramic fibers.

Tools Required

Screw Driver

Standard screw driver tool suitable for disassembly procedures.

Product Disassembly Process

Disassembly Steps

Sequential steps for disassembling the product to remove specific components.

Material Composition Details

Detailed breakdown of materials used in the facility's built components, including weight and treatment.