HP 1200 Maintenance Instructions

HP 1200
Maintenace Kit Instructions
Note
Before you change the separation pad,
clean the pickup roller.
If the input tray feeds more than one
page at a time, you might have to
replace the printer separation pad.
Recurring feed problems indicate that
the printer separation pad is worn.
• Unplug the power cord from the
printer, and allow the printer to cool
(image 10).
• Remove the input trays (image 11).
• Locate the blue separation pad
(image 12).
• To pry the separation pad up from the
spring-loaded base, insert a fl at-
edged screwdriver in the slot under
the separation pad and twist until the
tabs are free (image 13).
• Reach in through the input tray
opening, push the spring-loaded
base down with one hand, and pull
the separation pad up with the other
hand (image 14).
Replacing the Printer Separation Pad
Image 14
Image 13
Image 12
Image 11
Image 10

HP 1200 Specifications

General

Print Technology	Laser
Output Capacity	125 sheets
Connectivity	USB 2.0
Paper Handling	250-sheet input tray
First Page Out	10 seconds
Memory	8 MB
Operating System Compatibility	Windows, Mac OS