Country/region Accredited agency Applicable note number
3. The appliance coupler, exible cord, and wall plug must bear a “T” mark and registration number in accordance with the Japanese
Dentori Law. The exible cord must be Type VCTF, 3-conductor, 0.75mm
2
or 1.25mm
2
conductor size. The wall plug must be a
two-pole grounding type with a Japanese Industrial Standard C8303 (7 A, 125 V ac) conguration.
4.
The exible cord must be Type RVV, 3-conductor, 0.75mm
2
conductor size. Power cord set ttings (appliance coupler and wall
plug) must bear the CCC certication mark.
5.
The exible cord must be Type H05VV-F 3X0.75mm
2
conductor size. KTL logo and individual approval number must be on each
element. Corset approval number and logo must be printed on a ag label.
6.
The exible cord must be Type HVCTF 3X1.25mm
2
conductor size. Power cord set ttings (appliance coupler, cable, and wall plug)
must bear the BSMI certication mark.
7. For 127 V ac, the exible cord must be Type SVT or SJT 3 x 18 AWG, with plug NEMA 5-15P (15 A, 125 V ac), with UL and CSA or C-
UL marks. For 240 V ac, the
exible cord must be Type H05VV-F 3X0.75/1.00mm
2
conductor size, with plug BS 1363/A with BSI or
ASTA marks.
Requirements for specic countries and regions 83
To Next Page
Loading...
Need help?
General
