To Next Page

To Previous Page

Optical drive

Description Spare part number

DVD+/-RW Double-Layer SuperMulti Drive 750636-001

Before removing the optical drive, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and

then unplugging the AC adapter from the computer.

4. Remove the battery (see

Battery on page 41).

To remove the optical drive:

1. Remove the Phillips PM2.5×5.0 screw (1) that secures the optical drive to the computer.

2. Remove the optical drive (2) by sliding it out of the optical drive bay.

3. If it is necessary to replace the optical drive bracket on the rear of the optical drive, position the optical

drive with the rear panel toward you.

4. Remove the two Phillips PM2.0×3.0 screws (1) that secure the bracket to the optical drive.

Component replacement procedures 43

Questions and Answers:

Need help?

Do you have a question about the HP 15 Notebook PC and is the answer not in the manual?

HP 15 Notebook PC Specifications

General

Processor	Intel or AMD processors (various models available)
RAM	4GB/8GB/16GB DDR3/DDR4 (varies by model)
Storage	Up to 1 TB HDD or up to 512 GB SSD (various configurations available)
Display	15.6" diagonal HD (1366 x 768) or FHD (1920 x 1080) display
Graphics	AMD Radeon Graphics
Operating System	Windows 10
Optical Drive	DVD-RW (varies by model)
Wireless	Wi-Fi 802.11ac, Bluetooth 4.2
Audio	Stereo speakers
Webcam	HD Webcam with integrated microphone
Battery	3-cell (varies by model)
Ports	USB 2.0/3.0, HDMI, Ethernet, Headphone/microphone combo jack