To Next Page

To Previous Page

Solid-state drive

Table 6-5 Solid-state drive descriptions and part numbers

Description Spare part number

256 GB, PCIe, NVMe L20384-001

256 GB, SATA-3, TLC L20382-001

128 GB, SATA-3, TLC L20381-001

Before removing the solid-state drive, follow these steps:

1. Prepare the computer for disassembly (Preparation for disassembly on page 33).

2. Remove the optical drive (see Optical drive on page 34).

3. Remove the bottom cover (see Bottom cover on page 38).

4. Remove the battery (see Battery on page 41).

Remove the solid-state drive:

▲ Remove the Phillips M2.0 × 3.0 screw (1), and then pull the solid-state drive module from the socket (2).

Reverse this procedure to install the solid-state drive.

Component replacement procedures 47

Questions and Answers:

Need help?

Do you have a question about the HP 15 Series and is the answer not in the manual?

HP 15 Series Specifications

General

Processor	AMD Ryzen 7
Display	15.6-inch HD (1366 x 768) or FHD (1920 x 1080)
Storage	1TB SSD
Graphics	AMD Radeon Graphics
Operating System	Windows 11 Home/Pro
Battery	3-cell
Connectivity	Wi-Fi 5 or Wi-Fi 6, Bluetooth 4.2
Ports	USB Type-A, USB Type-C, HDMI, headphone/microphone combo jack