38 Chapter 2 Printing Tasks
EN
Printing on Transparencies
Only use transparencies recommended for use in laser printers, such
as HP transparency film. Ordering information is located on page 25.
Appendix B lists transparency specifications on page 149.
l Print transparencies from Tray 1.
l Use the top output tray to reduce curling (this is for
transparencies only; for other media use rear output tray to
reduce curling).
l To prevent transparencies from sticking together, remove any
transparencies in the output tray as they are printed.
l Place transparencies on a flat surface after removing them from
the printer.
To Next Page
Loading...