get started
17
install or replace the print cartridges
To get the best performance from your printer, use only genuine HP factory-filled print
cartridges.
1 If the printer is off, press the P
OWER
button on the printer’s
control panel to turn the printer on.
2 Load an index card in the paper tray so the printer can print
a calibration page after you install the print cartridge.
3 Take the new print cartridge out of its package and pull the
tab
to remove the clear
plastic tape
.
Do NOT touch the ink nozzles or the copper contacts on the print cartridge.
Touching these parts may cause print cartridge failure.
To Next Page
Loading...