HP 240 G4 - Page 64

Description Spare part
number
●
Intel Core i3-4005U processor 814044-001,-5
01, -601
For use in HP 240/246 G4 models:
Discrete graphics memory
●
Intel Core i5-5200U processor and 2 GB of discrete graphics memory
817889-001,-5
01, -601
●
Intel Core i3-4005U processor and 2 GB of discrete graphics memory 817887-001,-5
01, -601
UMA graphics memory
●
Intel Core i5-5200U processor on models with GLAN
826037-001,
-601
●
Intel Core i3-5010U processor 817888-001,-5
01, -601
●
Intel Core i3-5005U processor on touch screen models 824441-001,
-601
●
Intel Core i3-4005U processor 817886-001,-5
01, -601
●
Intel Pentium N3700 processor 817891-001,
-601
●
Intel Pentium N3825U processor on models with GLAN 824440-001,-5
01, -601
●
Intel Celeron N3050 processor with 2 GB of on-board system memory 814051-001,-5
01, -601
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is o or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 30).
5. Remove the optical drive (see Optical drive on page 31), if installed.
6. Remove the bottom cover (see Bottom cover on page 34).
7. Remove the hard drive (see Hard drive on page 37).
8. If applicable, remove the eMMC drive (see eMMC drive on page 39).
NOTE: When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board:
56 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts