Operating the Monitor
User’s Guide 4–5
Quick View (select
models only)
Select from the following modes:
■ Movie
■ Photo
■ Gaming
■ Text
■ Custom (settings saves when you adjust the Brightness,
Contrast or Color in one of the other Quick View options)
Custom Color Selects and adjusts your own color scales:
R — Sets your own red color levels.
G — Sets your own green color levels.
B — Sets your own blue color levels.
Language Selects the language in which the OSD menu is displayed. The
factory default is English.
Management Selects the power-management features of the monitor.
Volume (select models
only)
Adjusts the volume level.
OSD Control Adjusts the position of the OSD menu on the screen.
Horizontal OSD Position — Changes the viewing
position of the OSD menu to the left or right area of the
screen. The factory default range is 50.
Vertical OSD Position — Changes the viewing position
of the OSD menu to the top or bottom area of the
screen. The factory default range is 50.
OSD Transparency — Adjust to view the background
information through the OSD.
OSD Timeout — Sets the time in seconds that the OSD
is visible after the last button is pressed. The factory
default is 30 seconds.
Power Saver Enables the power saving feature (see “Power-Saver Feature” in
this chapter). Select:
On
Off
The factory default is On.
Mode Display Displays the resolution, refresh rate, and frequency information
on the screen each time the OSD Main Menu is accessed.
Select:
On
Off
The factory default is On or Off, depending on the model.
Power-On Status
Display
Displays the operating status of the monitor each time the
monitor is powered on. Select the location to which to display
the status:
Top
Middle
Bottom
Off
The factory default is Top or Off, depending on the model.
Icon
Main Menu
Options
Submenu Options Description (Continued)
To Next Page
Loading...
Need help?
General
