HP 24EA User Manual

EL-MF877-00 Page 1
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Product End-of-Life Disassembly Instructions
Product Category: Monitors and Displays
Marketing Name / Model
[List multiple models if applicable.]
HP 24ea 24-inch Display
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
2
Batteries
All types including standard alkaline and lithium
coin or button style batteries
0
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
0
Liquid Crystal Displays (LCD) with a surface
greater than 100 sq cm
Includes background illuminated displays with gas
discharge lamps
1
Cathode Ray Tubes (CRT)
0
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
0
External electrical cables and cords
3
Gas Discharge Lamps
0
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
0
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
0
Components and waste containing asbestos
0
Components, parts and materials containing
refractory ceramic fibers
0

HP 24EA Specifications

General

Brand	HP
Model	24EA
Category	Monitor
Language	English

Summary

Items Requiring Selective Treatment

Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA)

Items classified as requiring selective treatment: PCBs with surface > 10 sq cm.

Batteries

Items classified as requiring selective treatment: All types of batteries.

Mercury Containing Components

Items classified as requiring selective treatment: Lamps, display backlights, scanners, switches, batteries.

Liquid Crystal Displays (LCD)

Items classified as requiring selective treatment: LCDs with surface > 100 sq cm, including gas discharge lamps.

Capacitors / Condensers

Items classified as requiring selective treatment: Capacitors/condensers over 2.5 cm in diameter or height.

External Electrical Cables and Cords

Items classified as requiring selective treatment: External electrical cables and cords.

Gas Discharge Lamps

Items classified as requiring selective treatment: Gas discharge lamps.

Plastics Containing Brominated Flame Retardants

Items classified as requiring selective treatment: Plastics weighing > 25 grams with brominated flame retardants.

Components and Parts Containing Toner and Ink

Items classified as requiring selective treatment: Toner/ink cartridges, print heads, tubes, vent chambers.

Components and Waste Containing Asbestos

Items classified as requiring selective treatment: Components and waste containing asbestos.

Components, Parts and Materials Containing Refractory Ceramic Fibers

Items classified as requiring selective treatment: Components with refractory ceramic fibers.

Components, Parts and Materials Containing Radioactive Substances

Items classified as requiring selective treatment: Components with radioactive substances.

Tools Required for Disassembly

Screwdriver (Plum Flower Head)

Tool description: Screwdriver with a plum flower head, size PH2.

Hex Nut Screwdriver

Tool description: Hex nut screwdriver, size M5.

Product Disassembly Process Steps

Step 1: Quick Release Base Stand

Step 1: Release the base stand by pressing the white button and pulling out the stand.

Step 2: Remove Rear Cover

Step 2: Strip screws from the rear cover, remove the cover, and disconnect the 8-pin FFC.

Step 3: Remove Shielding

Step 3: Dismantle the rear cover supporter, pull LVDS/LED FFCs, and remove four screws from shielding.

Step 4: Strip Screws

Step 4: Remove the 9 screws.

Step 5: Release Materials for ESD

Step 5: Release all materials and place them by ESD.