HP 24er User Manual

EL-MF877-00 Page 1
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Product End-of-Life Disassembly Instructions
Product Category: Monitors and Displays
Marketing Name / Model
[List multiple models if applicable.]
HP 24er 23.8-inch Display
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
2
Batteries
All types including standard alkaline and lithium
coin or button style batteries
0
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
0
Liquid Crystal Displays (LCD) with a surface
greater than 100 sq cm
Includes background illuminated displays with gas
discharge lamps
1
Cathode Ray Tubes (CRT)
0
Capacitors / condensers (Containing PCB/PCT)
0
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
0
External electrical cables and cords
3
Gas Discharge Lamps
0
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
0
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
0
Components and waste containing asbestos
0

HP 24er Specifications

General

Brand	HP
Model	24er
Category	Monitor
Language	English

Summary

Items Requiring Selective Treatment

Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA)

Components with a surface area greater than 10 sq cm requiring selective treatment.

Batteries Requiring Selective Treatment

All types of batteries, including alkaline and lithium coin or button styles.

Mercury-Containing Components

Includes mercury in lamps, display backlights, scanner lamps, switches, and batteries.

Liquid Crystal Displays (LCD)

LCDs with a surface greater than 100 sq cm, including gas discharge lamp displays.

Tools for Disassembly

SCREW DRIVER (Plum flower head)

Plum flower head screwdriver, size PH2, for disassembly.

Hex Nut Screwdriver

Hex nut screwdriver, size M5, for component removal.

Product Disassembly Process

Base Stand Removal

Instructions for releasing the base stand using a button and screws.

Rear Cover Removal

Steps to remove the rear cover by stripping screws and deco.

Shielding and Component Separation

Removing acetate tapes, FFCs, and screws to separate shielding.

Final Material Release

Steps for releasing all materials and preparing them for ESD.