HP 2510 Series

5-year, 24x7 software phone support, software updates + Next Business Day
Hardware Exchange (HS560E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware
Exchange (HS561E)
Refer to the HP website at: www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP 2510-24 Switch
(J9019B)
Ports 24 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX); Media Type: Auto-MDIX; Duplex: half or full
2 dual-personality ports; each port can be used as either an RJ-45
10/100/1000 port or an open mini-GBIC slot (for use with mini-GBIC
transceivers)
Physical characteristics Dimensions 9.3(d) x 17.42(w) x 1.73(h) in. (23.62 x 44.25 x
4.39 cm) (1U height)
Weight 4.89 lb. (2.22 kg), Fully loaded
Memory and processor Processor MIPS 32 @ 264 MHz, 8 MB flash, 64 MB SDRAM;
packet buffer size: 384 KB
Mounting Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only
Performance 100 Mb Latency < 4.9 µs (64-byte packets)
1000 MB latency < 2.6 µs (64-byte packets)
Throughput up to 6.5 million pps (64-byte packets)
Switching capcity 8.8 Gbps
MAC address table size 8000 entries
Environment Operating temperature 32°F to 113°F (0°C to 45°C)
Operating relative
humidity
15% to 95% @ 104°F (40°C), noncondensing
Nonoperating/ Storage
temperature
-40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage
relative humidity
15% to 95% @ 149°F (65°C), noncondensing
Altitude up to 10,000 ft. (3 km)
Acoustic Power: 0 dB no fan
Electrical characteristics Maximum heat
dissipation
68 BTU/hr (71.74 kJ/hr)
Voltage 100-127/200-240 VAC
Current 0.7/0.4 A
Maximum power rating 20 W
Frequency 50/60 Hz
QuickSpecs
HP 2510 Switch Series
Technical Specifications
DA - 12599 Worldwide — Version 18 — November 5, 2013 Page 10