Need help?Do you have a question about the HP 2510-24 and is the answer not in the manual?
General| Switching Capacity | 8.8 Gbps |
|---|---|
| Layer | Layer 2 |
| Jumbo Frame Support | Yes |
| Ports | 24 x 10/100 |
| Management | Web-managed |
| Operating Temperature | 0°C to 45°C |
| Weight | 3.08 kg |
Details the 24 auto-sensing 10/100Base-TX ports and two dual-personality ports.
Explains the meaning and behavior of the various LEDs on the switch for status indication.
Describes how to use the LED mode select button to view different port status information.
Outlines the key functionalities and capabilities of the ProCurve Series 2510 Switch.
Provides a step-by-step summary of the installation process for the ProCurve Switch 2510-24.
Outlines essential safety and environmental precautions to follow before installing the switch.
Explains the procedure for installing and removing mini-GBIC modules from the switch.
Details how to confirm the switch is operating correctly after powering it on.
Describes the essential configuration steps for initial network management of the switch.
Details how to use the console setup screen for initial switch configuration.
Explains how to manage the switch remotely using its IP address via Telnet or web browser.
Offers initial steps and common solutions for resolving network and switch operational problems.
Explains how to interpret switch LED patterns to identify and diagnose issues.
Details tests to perform on the switch hardware to identify operational failures.
Provides instructions on how to reset the switch to its original factory default settings.
To Next Page
