HP 2530 User Manual

HP 2530 Switch Manual Supplement
Software Version YA.15.13
Abstract
This switch manual supplement is intended for network administrators and support personnel, and applies to the switch models
listed on this page unless otherwise noted. This document includes the following:
• Software Feature Updates in Release YA.15.13
Applicable Products
HP Switch 2530 Switch Series (J9772A, J9773A , J9775A , J9776A)
This supplement applies to the following manuals:
• HP Switch Software Access Security Guide
• HP Switch Software IPv6 Configuration Guide
HP Part Number: 5998-4559
Published: July 2013
Edition: 1

HP 2530 Specifications

General

Layer	Layer 2
Operating Temperature	32°F to 113°F (0°C to 45°C)
Model	HP 2530
Power over Ethernet (PoE)	PoE+
Management	Web interface, CLI, SNMP
Memory	128 MB flash
Input Voltage	100-240 VAC
Jumbo Frame Support	Yes
Operating Humidity	15% to 95% non-condensing

Summary

1 Updates for the HP Switch Software Access Security Guide

Configuring advanced threat protection

Covers advanced threat protection features like DHCP snooping, Dynamic ARP protection, and Instrumentation monitor.

DHCP snooping

Details DHCP snooping for preventing DoS attacks by distinguishing trusted and untrusted ports.

Dynamic ARP protection

Explains how to protect networks from ARP poisoning attacks using dynamic ARP protection.

Dynamic IP Lockdown

This feature prevents IP source address spoofing by enforcing IP-to-MAC bindings.

Using the instrumentation monitor

How to use the instrumentation monitor to detect security anomalies and irregular operations.

Configuring RADIUS server support for switch services

Introduction

Explains configuring CoS, rate-limiting, and ACL client services via a RADIUS server.

Configuring and using dynamic (RADIUS-assigned) access control lists

Describes applying RADIUS-assigned ACLs to filter IP traffic from authenticated clients.

2 Updates for the HP Switch Software IPv6 Configuration Guide

Access Control Lists (ACLs)

Details configuring, applying, and editing static IPv6 ACLs for traffic filtering.

ACL applications

Covers filtering traffic from hosts, subnets, and applying ACLs at network edges.

RADIUS-assigned ACLs

Explains ACLs configured on a RADIUS server and assigned to authenticated clients.

Planning and configuring ACLs

Outlines steps for identifying ACL actions, designing ACLs, and applying them.

ACL operation

Describes how ACLs apply to ports, trunks, and filter traffic types.

Guidelines for planning ACL structure

Covers determining ACL application points and the order of ACEs for resource efficiency.

ACL configuration structure

Details the basic structure of an ACL, including identity, remarks, and ACEs.