To Next PageTo Next Page
Need help?Do you have a question about the HP 2530-24 and is the answer not in the manual?
General| Switching Capacity | 12.8 Gbps |
|---|---|
| Forwarding Rate | 9.5 Mpps |
| Layer | Layer 2 |
| Power Supply | Internal |
| Weight | 2.72 kg |
| Input Voltage | 100-240 VAC |
| Ports | 24 |
| Management | SNMP |
| Memory | 128 MB SDRAM |
Overview of the front panel components and indicators of the HP 2530 switches.
Details on various port types including RJ-45, SFP, and dual-personality ports.
Explanation of switch status, port, and mode LEDs and their functions.
Functionality of reset, clear buttons, and console connection for management.
Key hardware and software features of the HP 2530 switch series.
Lists the components and accessory kits provided with the switches.
Essential safety and operational guidelines for switch installation.
Overview of the step-by-step process for installing the switch.
Steps for basic configuration including IP address and manager password.
How to use the console interface for initial switch setup.
Managing the switch remotely via Telnet or web browser.
Common issues and initial checks for resolving problems.
Interpreting LED patterns for fault diagnosis.
Methods for testing switch hardware and functionality.
Dimensions and weight of different HP 2530 switch models.
Voltage, current, and frequency range details for the switches.
Operating and non-operating temperature, humidity, and altitude limits.
Specifications for network cabling types and technologies.
Critical safety warnings, grounding, and servicing information.
Compliance statements for various regions (USA, Canada, Australia, Japan, Korea, Taiwan).
