HP X122 1G SFP LC BX-D Transceiver
J8177C
HP X112 100M SFP LC BX-D Transceiver
J9099B
HP X112 100M SFP LC BX-U Transceiver
J9100B
HP X121 1G SFP LC LH Transceiver
J4860C
HP X122 1G SFP LC BX-D Transceiver
J9142B
HP X122 1G SFP LC BX-U Transceiver
J9143A
HP X111 100M SFP LC FX Transceiver
J9054C
Note 2
If this switch is factory installed in HP Universal Racks, Then the J9583A#0D1 is required.
AMS then J9583A#0D1 is required.
EMEA then J9583A#0D1 is required.
APD, Japan and China then J9583A#0D1 is required.
CLIC Only - Allow the J9583AZ in all regions.
Internal Power Supplies
No Power supplies
Enter the following menu selections as integrated to the CTO Model X server above if order is factory built.
Transceivers
SFP Transceivers
HP X121 1G SFP LC SX Transceiver
J4858C
HP X121 1G SFP LC LX Transceiver
J4859C
HP X111 100M SFP LC FX Transceiver
J9054C
HP X121 1G SFP LC LH Transceiver
J4860C
HP X121 1G SFP RJ45 T Transceiver
J8177C
HP X122 1G SFP LC BX-D Transceiver
J9142B
HP X122 1G SFP LC BX-U Transceiver
J9143B
HP X112 100M SFP LC BX-D Transceiver
J9099B
HP X112 100M SFP LC BX-U Transceiver
J9100B
Cables
QuickSpecs
HP 2610 Switch Series
Configuration
DA - 13032 North America — Version 19 — January 17, 2014
Page 6
To Next Page
Loading...
