EasyManua.ls Logo

HP 2615 series

HP 2615 series
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Models
HP 2615-8-PoE Switch
J9565A
Key features
Scalable 10/100 connectivity
Layer 2 and 3 switching capabilities
sFlow, ACLs, and rate limiting
Energy-efficient design and quiet operation
Rack-mountable, compact form factor
Product overview
The HP 2615-8-PoE Switch is a fully managed 8-port 10/100 switch with an additional two dual-personality Gigabit Ethernet ports for
copper or SFP connectivity. Together with static and RIP IPv4 routing, robust security and management, enterprise-class features, a
free lifetime warranty, and free software updates, the HP 2615-8-PoE Switch is a cost-effective solution.
The HP 2615-8-PoE Switch is fanless, providing quiet operation and making it ideal for deployments in open spaces. In addition, the
compact form factor allows for flexible deployments, including wall, surface, or rack mounting.
These switches can be deployed at enterprise edge and remote branch offices, as well as converged networks.
Features and benefits
Quality of Service
(QoS)
Selectable queue configuration
performance and/or traffic reliability can be increased by selecting the number of queues that best meet the requirements of
network applications; the switch will map 8 priorities to either 2 or 4 queues
Class of Service (CoS)
sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source
port, and DiffServ
Layer 4 prioritization
enables prioritization based on TCP/UDP port numbers
Traffic prioritization (IEEE 802.1p)
allows real-time traffic classification into eight priority levels mapped to four queues
Rate limiting
per-port ingress-enforced maximum
Flow control
helps ensure reliable communications during full-duplex operation
Type of service
IP precedence
honors IP precedence bits and allows mapping to a priority queue
Differentiated Services Code Point values
honors Differentiated Services Code Point (DSCP) bits and allows mapping to a priority queue
Management
QuickSpecs
HP 2615 Switch Series
Overview
DA - 13673 North America — Version 11 — December 9, 2013
Page 1
Question and Answer IconNeed help?

Do you have a question about the HP 2615 series and is the answer not in the manual?

HP 2615 series Specifications

General IconGeneral
ManageableYes
Power over Ethernet (PoE)No
Jumbo Frame SupportYes
ManagementSNMP
Operating humidity10% to 90% non-condensing

Summary

Overview

Key Features

Highlights core capabilities like scalability, switching, energy efficiency, and form factor.

Connectivity

IEEE 802.3 af Power over Ethernet

Details the PoE capabilities per port for powering network devices.

Layer 2 Switching

VLAN Support and Tagging

Explains support for IEEE 802.1Q VLANs and simultaneous VLANs.

Layer 3 Routing

Security

Access Control Lists (ACLs)

Details IP Layer 3 filtering based on source/destination IP and port.

IEEE 802.1 X Port Based Network Access Control

Explains 802.1X for port-based network access control.

Secure Protocols for Encryption

Covers SSHv2, SSL, and SFTP for secure management traffic.

Access Control Lists (ACLs)

Details ACLs for network access control and filtering.

Port Security

Allows access only to specified MAC addresses on ports.

Convergence

Monitor and Diagnostics

Flexibility

Product Architecture

Warranty and Support

Lifetime Warranty 2.0

Covers advance hardware replacement and support for the product's lifetime.

Configuration

Cables

Technical Specifications

IO Ports and Slots

Details the physical ports and interface slots on the switch.

Electrical Characteristics

Lists AC voltage, current, power ratings, and frequency.

Immunity

Standards and Protocols

General Protocols

Lists IEEE standards and RFCs for network protocols like VLANs and routing.

QoSCoS

Lists RFCs related to Quality of Service and Class of Service.

Accessory Product Details

HP X121 1 G SFP LC SX Transceiver (J4858 C)

Details specifications for the SX transceiver, including ports, physical, environment, electrical, and cabling.

HP X121 1 G SFP LC LX Transceiver (J4859 C)

Details specifications for the LX transceiver, including ports, physical, environment, and cabling.

HP X111 100 M SFP LC FX Transceiver (J9054 C)

Details specifications for the FX transceiver, including ports, physical, environment, cabling, notes, and services.

HP X112 100 M SFP LC BX-D Transceiver (J9099 B)

Details specifications for the BX-D transceiver, including ports, physical, environment, cabling, and notes.

Accessory Product Details

Related product manuals