HP 2620 series User Manual

3
Data sheet | HP 2620 Switch Series
Management
• Dual ash images
Provides independent primary and secondary operating system les for backup while upgrading
• Friendly port names
Allows assignment of descriptive names to ports
• Multiple conguration les
Are easily stored with a ash image
• Port mirroring
Enables trac on a port to be simultaneously sent to a network analyzer for monitoring
• sFlow (RFC 3176)
Delivers wire-speed trac accounting and monitoring, congured by the SNMP and CLI with
three terminal encrypted receivers
• Remote monitoring (RMON)
Provides advanced monitoring and reporting capabilities for statistics, history, alarms, and events
• Find, x, and inform
Finds and xes common network problems automatically, and then informs the administrator
• NEW Comware CLI
– Comware-compatible CLI
Bridges the experience of HP Comware CLI users who use the HP ProVision software CLI
– Display and fundamental Comware CLI commands
Are embedded in the switch CLI as native commands; display output is formatted as on
Comware-based switches and fundamental commands provide a Comware-familiar initial
switch setup
– Conguration Comware CLI commands
Elicit CLI help to formulate the correct ProVision software CLI command
L2 switching
• VLANs
Provide support for 512 VLANs and 4,094 VLAN IDs
• Jumbo packet support
Improves the performance of large data transfers; and supports frame sizes up to 9220 bytes
• IEEE 802.1v protocol VLANs
Isolate select non-IPv4 protocols automatically into their own VLANs
• NEW Per-VLAN spanning tree plus (PVST+)
Allows each VLAN to build a separate spanning tree, improving link bandwidth usage in
network environments with multiple VLANs
L3 routing
• Static IP routing
Provides manually congured routing; and includes the ECMP capability
• Routing information protocol (RIP)
Provides RIPv1 and RIPv2 routing
Security
• Access control lists (ACLs)
Provide IP L3 ltering, based on the source/destination IP address/subnet and source/destination
TCP/UDP port number
• Source-port ltering
Allows only specied ports to communicate with each other
• RADIUS/TACACS+
Eases switch management security administration by using a password authentication server
• Secure shell
Encrypts all transmitted data for secure remote CLI access over IP networks

HP 2620 series Specifications

General

Model	HP 2620 series
Ports	24 or 48 10/100 ports
Uplink Ports	2 or 4 x Gigabit SFP ports
Layer	Layer 2
Management	Web, CLI, SNMP
MAC Address Table Size	16000 entries
Memory and Processor	128 MB flash
Features	VLAN, QoS, ACLs, IPv6
Jumbo Frame Support	Yes, up to 9220 bytes
Operating Temperature	0°C to 45°C (32°F to 113°F)