HP 27b Disassembly Instructions

Step
Figure
Description
Remove
the Base
ASSY.
The model
using the
curved surface
screen; There
must be put soft
mat above of
the work station
and don't push
hard on the
machine to
avoid cause
screen to crack.
Remove the
screws to
remove the
stand-base
assy.
Remove
the rear
cover
Use
disassembly
tool to open all
the latches
along the edge
of the Rear
Cover
Remove
the pin
and the
tape
Remove the pin
and tape

HP 27b Specifications

General

Brand	HP
Model	27b
Category	Monitor
Language	English