HP 27er - Front Bezel Controls

Front bezel controls
Control Function
1 Menu/OK Opens the OSD menu or selects items on the OSD menu.
2 Information/Minus Information: Shows Monitor Information window.
Minus: If the OSD menu is on, press to navigate backward through the OSD menu and
decrease adjustment levels.
3 Input/Plus Input: If the OSD menu is inactive, press to switch the video signal input (VGA or HDMI).
Plus: If the OSD menu is on, press to navigate forward through the OSD menu and
increase adjustment levels.
4 Auto Adjustment/QuickView/Exit Auto Adjustment: If the OSD menu is inactive, press to activate the auto-adjustment
feature to optimize the screen image (for VGA).
QuickView: If the OSD menu is inactive, press to activate the QuickView to choose
dierent video settings (for HDMI).
Exit: If the OSD menu is on, press to save any changes made, and exit the OSD menu.
5 Power Turns the monitor on or o.
NOTE: To view an OSD menu simulator, visit the HP Customer Self Repair Services Media Library at
http://www.hp.com/go/sml.
4 Chapter 1 Getting Started