HP 27er User Manual

2. Connect a video cable.
NOTE: The monitor will automatically determine which inputs have valid video signals. The inputs can
be selected by pressing the Menu button to access the On-Screen Display (OSD) menu and selecting
Input Control.
●
Connect a VGA cable to the VGA connector on the rear of the monitor and the other end to the VGA
connector on the source device.
●
Connect an HDMI cable to the HDMI connector on the rear of the monitor and the other end to a
HDMI connector on the source device.
6 Chapter 1 Getting Started

HP 27er Specifications

General

Color	natural silver, silver
Screen Type	led
Tiltable	yes
Webcam	no
OS Compatibility	windows
Screen Size	27 inches
Panel Type	ips
Aspect Ratio	16:9
Resolution	1920 x 1080
Native Resolution	1920 x 1080
Refresh Rate	60hz
Horizontal Viewing Angle	178 degrees
Vertical Viewing Angle	178 degrees
Response Time	7 milliseconds
Brightness	250 candela per square meter
Contrast Ratio	5, 000, 000:1
Pixel Pitch	82 pixels per inch
VGA Ports	1
Power Saving Mode	0.3 watts
Power Consumption	28 watts
Width with Stand	24.4 inches
Net Weight without Stand	8.4 pounds