ENWW Maintaining the printheads 63
To replace the printheads
Note Only replace printheads after you have attempted to clean the printheads. See To clean
printheads automatically and To clean the printhead contacts manually.
1 Ensure the printer is plugged in and turned on.
2 Lift the ink cartridge cover, and then lift the printhead cover.
3 Lift to open the printhead latch.
4 Lift the handle of a printhead and use it to pull the printhead out of its slot.
5 Remove the new printhead from its package, and then remove the protective tape.
6 Insert the printhead into its color-coded slot. Press down firmly on the printhead to ensure
proper contact.
To Next Page
Loading...