HP 2920-24G Switch J9726A User Manual

Models
HP 2920-24G Switch J9726A
HP 2920-24G-PoE+ Switch J9727A
HP 2920-48G Switch J9728A
HP 2920-48G-PoE+ Switch J9729A
HP 2920-48G-PoE+ 740W Switch J9836A
HP 2920-24G Switch
1. Power, Fault, and Locator LEDs 7. PoE, Tmp (Temperature), Test, Fan, and Aux
(Auxiliary) port status LED
2. Console ports 8. Reset and Clear buttons
3. LED Mode button and indicator LEDs 9. Aux port and Out-of-Band Management port
4. Status LEDs for components on the back of the switch 10. 10/100/1000BASE-T PoE+ RJ-45 ports
5. Stacking status LEDs 11. Dual-Personality (10/100/1000BASE-T or SFP) ports
6. Switch port LEDs
HP 2920-24G-PoE+ Switch
1. Power, Fault, and Locator LEDs 7. PoE, Tmp (Temperature), Test, Fan, and Aux
(Auxiliary) port status LED
2. Console ports 8. Reset and Clear buttons
3. LED Mode button and indicator LEDs 9. Aux port and Out-of-Band Management port
4. Status LEDs for components on the back of the switch 10. 10/100/1000BASE-T PoE+ RJ-45 ports
QuickSpecs
HP 2920 Switch Series
Overview
DA - 14499 Worldwide — Version 10 — December 9, 2013 Page 1

HP 2920-24G Switch J9726A Specifications

General

Ports	24 x 10/100/1000
Switching Capacity	128 Gbps
Forwarding Rate	95.2 Mpps
Layer	Layer 3
PoE	No
Rack Mountable	Yes
Jumbo Frame Support	Yes
Power Supply	Internal
Input Voltage	100-240 VAC
Operating Temperature Range	0°C to 45°C
Routing Protocol	RIP
Features	IPv6, QoS, VLAN
Operating Humidity	15% to 95% non-condensing
Uplink Ports	4 x SFP
Management	Web, CLI, SNMP