HP 3-in-1 NAS - Page 21

Troubleshooting
Maintenance and Service Guide 2–3
Table 2-2
Undocking Problems and Solutions
Problem Possible Cause Solution
The computer will not
disconnect from the
docking station.
The connectors may be
jammed.
Press the eject button
all the way in. If the
computer does not
disconnect, repeat this
procedure to disconnect
the computer.
Ä
Applying
excessive force
may damage
connector pins.
The HP/Kensington
Cable Lock is in the
locked position.
Unlock the lock and then
disconnect the computer.