HP 3335A - Page 7

Model 3335A Section |
Table 1-1. Specifications (Cont'd).
OPTION 002/004
peda 75 &: 200 Hz to 80.999 999 999 MHz
124 2: 10 kHz to 10 MHz
135 Q: 16 kHz to 2 MHz
Stability:
Long Term: + 1 x 10° per day
+ 1x 10° per month
See STANDARD /OPTION 001 table for Option 001 stability.
Spectral Purity:
Harmonic Distortion:
All harmonically related signals wil! be less than the follow-
ing levels {relative to the fundamental) at full output:
{75 Q) O dBm (124 Q, 135 Q)
impedance Freq Range Harmonic Level
759 200 Hz to 10 MHz 45 dB
10 MHz to 80 MHz 40 dB
124 9 10 kHz to 10 MHz —45 dB
135 Q 10 kHz to 2 MHz —45 dB
Integrated Phase Noise:
(30 kHz band, excluding + 1 Hz, centered on the carrier}
9.9 MHz: < —63 dB
20 MHz: < —70 dB
40 MHz: <—64d8
80 MHz: < —58 daB
Spurious (25°C + 10°C):
All non-harmonically related signals
Impedance {whichever is greater}
75 Q -425 dBm or —75 dBc
124 2 ~97 dBm or —75 dBc (de to 260 MHz)
135.0 ~100 dBm or --75 dBc {dc to 10 MHz}
—68 dBm or ~75 dBe (10 MHz—200 MHz)
AMPLITUBE:
Range: 759
124 Q P +11.25 dBm to --88.74 dBm
135 Q
Absolute Level Accuracy: (Maximum output at 100 kHz,
10°C to 35°C)
75 Q:2 0.05 dB
124/135 Q: + 0.1 dB
Flatness; (Relative to 100 kHz, Full Amplitude}
759 1 kHz—25 MHz: = ,07 dB
200 Hz—80 MHz: + .15 dB
124 Q 50 kHz-—-10 MHz: + .15dB
10 kHz—10 MHz: .4dB
135 2 10 kHz—2 MHz: + .18 dB
Amplitude Accuracy (includes effects of flatness and attenuator):
750:
5 200 Hz 1 kHz 25 MHz 50 MHz
3 £71.25
ele ae + 0.25 dB + 0.15 dB + 0.35 dB
ie gam “8 + 0.30 dB + 0.20dB + 0.45 dB
“at _439.74
E : t 0.40 dB + 0.30 dB + 0.70 dB
© -70,0 *
na 3 10 kHz 50 kHz 10 MHz
Q: —
gga Tt +0.60 dB + 0.35dB
Sea 7874 + 0.65 dB £ 0.40 dB
a y t 1.1 dB t 0.85 dB
6 -70.0*
135 Q 5 10 kHz 2 MHz
>
ah Te + 0.35 dB
a5 2 was + 0.40 dB
m Q, =~ porn
5 B t 0.85 dB
ô --70.0*
Output Balance: 124/135 N:360 dB
*Levels to ~88.74 dBm can be. selected but accuracies are unspecified due to the spurious noise floor of —100 dBm,
]-4a