HP 3500 Series

To Next Page

To Previous Page

92 Printer maintenance ENWW

6 Align the print cartridge with the tracks inside the printer, and using the blue handle, insert the

print cartridge until it is firmly seated.

7 Firmly close the front door.

After a short calibration time, the control panel should display READY.

Note If a cartridge is in the wrong slot or the wrong type for the printer, the control panel will display the

message, INCORRECT <COLOR> or INCORRECT SUPPLIES.

8 Installation is complete. Place the used print cartridge in the box in which the new cartridge

arrived. See the enclosed recycling guide for recycling instructions.

9 If you are using a non-HP print cartridge, check the printer control panel for further instructions.

For additional help, go to http://www.hp.com/support/clj3500

for the HP Color LaserJet 3500 series

printer or to http://www.hp.com/support/clj3700

for the HP Color LaserJet 3700 series printer.

Other manuals for HP 3500 Series