ENWW Covers 205
6 Unhook one claw (3) from the bottom of the cover and pull out the bottom of the cover to
loosen it.
Reassembly note: Remember to put the switch rod back into the switch button.
Figure 6-8 Left front cover removal (2 of 3)
7 Unhook three more claws by pressing in or squeezing, at the indicated locations (1), working
up from the bottom, to remove the cover (2) from the printer.
Figure 6-9 Left front cover removal (3 of 3)
2
1
3
1
1
1
2
To Next Page
Loading...
