ENWW Site requirements 9
Site requirements
The printer must be kept in a proper location to maintain the performance level that has been set at
the factory. In particular, be sure that the environment adheres to the specifications listed in this
chapter.
Below are recommendations for the printer location and placement.
Make sure the printer has the following:
● a well-ventilated, dust-free area
● a hard, level surface (not more than a 2° angle) that can support
approximately 43.4 kg (95.5 lbs)
● a level surface that supports all four corners of the 500-sheet paper feeder
● a constant temperature and humidity. (Do not install near water sources, humidifiers, air
conditioners, refrigerators, or other major appliances)
Make sure to keep the printer away from the following:
● direct sunlight, dust, open flames, or water
● the direct flow of exhaust from air ventilation systems
● magnets and devices that emit a magnetic field
● areas subject to vibration
● walls or other objects (There must be enough space around the printer for proper access and
ventilation. See the figures Space requirements for the HP Color LaserJet 3500 series printer
and Space requirements for the HP Color LaserJet 3700 series printer with optional Tray 3, on
the following pages.)
To Next Page
Loading...
