HP 3500 Series

ENWW Site requirements 11
Electrical specifications
WARNING! Power requirements are based on the country/region where the printer is sold. Do not convert
operating voltages. This may damage the printer and void the product warranty.
Table 1-3 lists the electrical specifications required to run the printer safely and Table 1-4 lists the
power consumption.
Note These values are subject to change. For current information, see http://www.hp.com/support/clj3500
for the HP Color LaserJet 3500 series printer or http://www.hp.com/support/clj3700
for the HP Color
LaserJet 3700 series printer.
PowerSave default activation time is 30 minutes.
Environmental specifications
Keep the printer within the environmental conditions shown in Table 1-5 for optimum performance.
Table 1-3 Electrical specifications
Item 110-volt models 220-volt models
Power requirements 100 to 127 V (+/-10%)
50 to 60 Hz (+/- 2 Hz)
220 to 240 V (+/-10%)
50 to 60 Hz (+/- 2 Hz)
Minimum recommended circuit
capacity for typical product
5.3 A 3 A
Table 1-4 Power consumption for 110 and 220-volt (average, in watts)
Product Active Idle Power Save Off Heat output-idle (BTU/hour)
HP Color LaserJet 3500 400 25 25 0.25 85
HP Color LaserJet 3500n 400 26 26 0.25 89
HP Color LaserJet 3700
400 25 25 0.25 85
HP Color LaserJet 3700n
400 26 26 0.25 89
HP Color LaserJet 3700dn
400 26 26 0.25 89
HP Color LaserJet 3700dtn
400 26 26 0.25 89
Table 1-5 Environmental specifications
Environment Recommended Allowed
Temperature 17° to 25° C (62.6° to 77° F) 10° to 27° C (50° to 81° F)
Humidity 20% to 60% RH 10% to 70% RH
Altitude Not applicable 0 to 2600 m (0 to 8530 ft)