ENWW Solenoids and Clutches 261
Black (K) development clutch (CL2 - image drive) removal
1 Remove the image drive unit. See Image drive assembly removal.
2 Disconnect one connector (1), remove the e-clip (2), and remove the black development clutch
(3).
Figure 6-97 Black development clutch removal (2 of 2)
Developing engaging drive clutch (CL3) removal
1 Remove the developing engaging drive assembly. See Developing engaging drive assembly
removal.
2 Remove the e-ring (1) and remove the developing engaging drive clutch (2).
Figure 6-98 Developing engaging drive clutch removal
1
2
3
1
2
To Next Page
Loading...
