HP 3500 Series - Page 331

ENWW Printer error troubleshooting 317
Performing
upgrade
A firmware upgrade is in process. No action necessary.
Do not turn off the printer.
please wait The printer is in the process of clearing
data.
No action necessary.
Powersave on The printer is in the Powersave mode.
Any button pressed or the receipt of
data will clear PowerSave and execute
the action.
Press any control panel button or the receipt
of data will clear PowerSave.
Printing...
CONFIGURATION
The printer is generating the
configuration page. The printer will
return to the online Ready state when
the page is completed. No action
necessary.
No action necessary.
Printing...
DEMO PAGE
The printer is generating the demo
page. The printer will return to the
online Ready state when the page is
completed.
No action necessary.
Printing...
ENGINE TEST
This message is displayed while the
engine test page is being printed,
initiated by pressing the engine test
button on the DC controller PCB.
No action necessary.
Printing...
EVENT LOG
The printer is generating the event log
page. The printer will return to the
online Ready state when the page is
completed.
No action necessary.
Printing...
FILE DIRECTORY
HP 3700 only.
The printer is generating the mass
storage directory page. The printer will
return to the Ready state when the
page is completed.
No action necessary.
Printing...
FONT LIST
HP 3700 only.
The printer is generating either the
PCL or PS personality typeface list.
The printer will return to the Ready
state when the page is completed.
No action necessary.
Printing...
MENU MAP
The printer is generating the printer
menu map. The printer will return to
the Ready state when the page is
completed.
No action necessary.
Printing...
PQ troubleshooting
The printer is generating the print
quality troubleshooting pages. The
printer will return to the Ready state
when the pages are printed.
Follow the instructions on the printed pages.
Printing...
REGISTRATION PAGE
The printer is generating the
registration page. The printer will
return to the SET REGISTRATION
menu when the page is completed.
Follow the instructions on the printed pages.
PRINTING STOPPED
To continue press
This message is displayed when a
Print/Stop Test is run and the time
expires.
Press to continue printing.
Table 7-2 Alphabetical printer messages (continued)
Message Description Action