316 Troubleshooting ENWW
ORDER <COLOR>
CARTRIDGE
alternates with
LESS THAN
XXXX PAGES
alternates with
Ready
The identified print cartridge is nearing
the end of its useful life. The printer is
ready and will continue for the
estimated number of pages indicated.
Order the identified print cartridge. Printing
will continue until REPLACE <COLOR>
CARTRIDGE is shown.
Note: Estimated pages remaining is based
upon historical page coverage with this
supply.
See Ordering parts (in chapter 8) for more
information.
ORDER FUSER KIT
alternates with
LESS THAN
XXXX PAGES
alternates with
Ready
For help press
The fuser is near end of life. The
printer is ready and will continue for the
estimated number of pages indicated.
Order the fuser kit. Printing can continue until
REPLACE FUSER KIT is shown.
or
Press for help.
See Ordering parts (in chapter 8) for more
information.
ORDER SUPPLIES
alternates with
Ready
More than one supply item is low. 1. Press to identify which supplies should
be ordered or print a supplies status page.
2. Order the identified supplies. Printing can
continue until REPLACE SUPPLIES is
reached.
or
Press for help.
See Ordering parts (in chapter 8) for more
information.
ORDER TRANSFER KIT
alternates with
LESS THAN
XXXX PAGES
alternates with
Ready
For help press
The number of pages remaining for the
transfer unit has reached the low
threshold, and the SUPPLIES LOW
setting in SYSTEM SETUP is set to
STOP.
Order the transfer kit. Printing can continue
until REPLACE TRANSFER KIT is reached.
Press for help.
See Ordering parts (in chapter 8) for more
information.
Paused
alternates with
To return to Ready
press the Stop key
The printer has paused. Press the Stop key to resume printing.
Performing...
PAPER PATH TEST
The printer is performing a Paper Path
Test.
No action necessary.
Table 7-2 Alphabetical printer messages (continued)
Message Description Action
To Next Page
Loading...
