398 Troubleshooting ENWW
Paper handling menu
The Paper handling menu allows you to configure input trays by size and type. It is important to
configure the trays with this menu before you print for the first time.
Note If you have used previous HP LaserJet printers, you might be accustomed to configuring Tray 1 to
first mode or cassette mode. To mimic the settings for first mode, configure Tray 1 for size = ANY
SIZE and type = ANY TYPE. To mimic the settings for cassette mode, set either the size or type for
Tray 1 to a setting other than ANY SIZE or ANY TYPE.
Table 7-42 Paper handling menu
Menu item Value Description
TRAY 1 SIZE A list of available sizes
appears.
Allows you to configure the paper size for Tray 1. The
default value is ANY SIZE. See
Supported media weights and sizes for a complete
list of available sizes.
TRAY 1 TYPE A list of available types
appears.
Allows you to configure the media type for Tray 1.
The default value is ANY SIZE. See
Supported media weights and sizes for a complete
list of available types.
TRAY 2 SIZE
TRAY 3 SIZE
A list of available sizes
appears.
Allows you to configure the paper size for Tray 2 or
Tray 3. The default size is Letter or A4 depending on
the country/region. See
Supported media weights and sizes for a complete
list of available sizes.
TRAY 2 TYPE
TRAY 3 TYPE
A list of available types
appears.
Allows you to configure the paper type for Tray 2 or
Tray 3. The default is PLAIN. See
Supported media weights and sizes for a complete
list of available types.
To Next Page
Loading...
