ENWW Control panel troubleshooting 399
Configure device menu
The configure device menu allows you to change or reset the default print settings, to adjust the
print quality, and to change the system configuration and I/O options.
Printing menu
These settings affect only jobs without identified properties. Most jobs identify all of the properties
and override the values set from this menu. This menu can also be used to set default paper size
and type.
.
Table 7-43 Printing menu
Menu item Values Description
COPIES 1 - 32000 Allows you to set the default number of copies. The
default number of copies is 1.
DEFAULT PAPER
SIZE
A list of available sizes
appears.
Allows you to set the default paper size.
DEFAULT CUSTOM
PAPER SIZE
UNIT OF MEASURE
X DIMENSION
Y DIMENSION
Allows you to set the default size for any custom job
without dimensions. Available for Tray 1.
DUPLEX OFF
ON
HP 3700dn and 3700dtn only
Allows you to enable or disable the duplex function
(automatic 2-sided printing). The default is OFF. You
can override this setting in the printer driver.
DUPLEX BINDING LONG EDGE
SHORT EDGE
Allows you to choose whether a duplex job will be
flipped on the long edge or the short edge.
OVERRIDE A4/
LETTER
NO
YES
Allows you to set the printer to print an A4 job on
letter-size paper when no A4 paper is loaded, or to
print a letter-size job on A4 when no letter-size paper
is loaded. The default is NO.
MANUAL FEED ON
OFF
The default is OFF. Setting it to ON makes MANUAL
FEED the default for jobs that do not select a tray.
You can override this setting in the printer driver.
COURIER FONT REGULAR
DARK
HP 3700 only.
Allows you to select a version of the Courier font. The
default is REGULAR.
WIDE A4 NO
YES
HP 3700 only.
Allows you to change the printable area of A4 paper
so that eighty 10-pitch characters may be printed on
a single line. The default is NO.
PRINT PS ERRORS OFF
ON
HP 3700 only.
Allows you to select to print PS (emulated PostScript)
error pages. The default is OFF.
To Next Page
Loading...
