ENWW Control panel troubleshooting 401
Print quality menu
The Print quality menu allows you to adjust all aspects of print quality, including calibration,
registration, and color halftone settings.
Table 7-44 Print quality menu
Menu item Values Description
ADJUST COLOR CYAN DENSITY
MAGENTA DENSITY
YELLOW DENSITY
BLACK DENSITY
RESTORE COLOR VALUES
Allows you to modify the halftone settings
for each color. The default for each color is
0.
SET REGISTRATION PRINT TEST PAGE
SOURCE
ADJUST TRAY 1
ADJUST TRAY 2
ADJUST TRAY 3
Allows 1-sided and 2-sided image align-
ment. The default for SOURCE is TRAY 2.
The default for the sub-items ADJUST
TRAY 1, ADJUST TRAY 2, and ADJUST
TRAY 3 is 0.
AUTO SENSE MODE EXPANDED SENSING
TRANSPARENCY ONLY
If a tray is configured to PLAIN or ANY
SIZE, and the print job does not specify the
media type, the printer will adjust the print
quality for the type of print media it senses.
The default is EXPANDED SENSING,
which senses transparencies, glossy
paper, and tough paper.
INK TRANSPARENCY REJECT-GUARD FUSER
ACCEPT-NOT ADVISED
REJECT-GUARD FUSER stops the print
job when a noncompatible transparency is
detected. This option protects the printer
fuser from damage.
ACCEPTED-NOT ADVISED allows the job
to print normally even though a non-com-
patible transparency is being used.
The default value is REJECT-GUARD
FUSER.
PRINT M0DES A list of available modes
appears
Allows you to associate each paper type
with a specific print mode
To Next Page
Loading...
