HP 3500 Series

ENWW Control panel troubleshooting 405
DISPLAY BRIGHENESS 1 - 10 Allows you to adjust the brightness of the
printer's control panel. The default is 5.
PERSONALITY AUTO
PCL
PS
Sets the default personality to automatic
switching, PCL, or PostScript emulation. The
default is AUTO.
CLEARABLE WARNINGS ON
JOB
Allows you to set the amount of time that a
clearable warning is displayed on the printer
control panel. The default is JOB, which is
displayed until is pressed. ON is displayed
until the end of the job that generated the
warning.
AUTO CONTINUE ON
OFF
Determines printer behavior when the
system generates an Auto Continuable error.
The default is ON.
ON automatically continues printing after 10
seconds.
OFF pauses printing. Press to continue
printing.
SUPPLIES LOW CONTINUE
STOP
Sets low supplies reporting options. The
default is CONTINUE.
STOP pauses printing when a low supply is
reported. Press
to continue printing.
JAM RECOVERY AUTO
ON
OFF
Sets whether the printer will attempt to
reprint pages after a jam. The default is
AUTO.
RAM DISK AUTO
OFF
Determines how the RAM disk feature is
configured. AUTO allows the printer to
determine the optimal RAM disk size based
on the amount of available memory. OFF
disables the RAM disk, but a minimal RAM
disk is still available. The default is AUTO.
HP Color LaserJet 3700 series printer only.
LANGUAGE A list of available languages
appears.
Sets the default control panel language.
Table 7-45 System setup submenu (continued)
Menu item Values Description