60 Installation and configuration ENWW
Installing a new control panel overlay (optional)
Overlays are available for several languages and come shipped with the printer. If you are setting
up a printer for a language other than English, complete the following procedure.
1 Select the language from the sheet of adhesive control panel overlays.
2 Position the new overlay over the top of the control panel. Set the overlay in place by pressing
down on the overlay and smoothing it across its surface.
Testing the printer operation
Print a demo page to ensure the printer is working properly.
1 Press M
ENU to enter the MENUS.
2 Press to highlight INFORMATION.
3 Press to select INFORMATION.
4 Press to highlight PRINT DEMO
5 Press to select PRINT CONFIGURATION.
After printing the demo page, the printer control panel displays the READY message.
To Next Page
Loading...
