78 Installation and configuration ENWW
10 Reconnect the power cable and the USB/parallel cable.
11 Turn the printer on.
12 If you installed a memory DIMM, go to Enabling memory. If you installed a language font
DIMM, go to Enabling the language font DIMM (hp color LaserJet 3700 only).
Enabling memory
If you installed a memory DIMM, set the printer driver to recognize the newly added memory.
To enable memory for Windows
1 On the Start menu, point to Settings, and click Printers or Printers and Faxes.
2 Select this printer and select Properties.
3 On the Configure tab, click More.
4 In the Total Memory field, type or select the total amount of memory that is now installed.
5 Click OK.
6 Go to Checking DIMM installation (hp color LaserJet 3700 only).
To Next Page
Loading...
