82 Installation and configuration ENWW
6 Reconnect the power cable and turn the printer on.
.
7 Print a configuration page. In addition to a printer configuration page and a Supplies Status
page, an HP Jetdirect configuration page that contains network configuration and status
information should also print.
If it does not print, uninstall and reinstall the print server card to ensure that it is completely
seated in the slot.
8 Perform one of these steps:
Choose the correct port. See the computer or operating system documentation for
instructions.
Reinstall the software, choosing the network installation this time.
Installing an hp Jetdirect en3700 external print server
1 Attach the HP Jetdirect en3700 external print server to a 10Base-T or to a 100Base-T local
network by plugging the network cable into the network port on the rear panel.
To Next Page
Loading...
